Synthetic Oils: This type is an engineered product designed to generate a chemical reaction based on the machine's pressure and temperature. However, sulfur phosphorus additives can eventually harm machine surfaces, especially yellow metals. Compound. It is not intended for use in engines that are prone to spikes in activity. One of these common antiwear additives is sulfur phosphorous, which works to alter the machine surface to prevent the adhesive in boundary lubricants from wearing away. It has a higher viscosity, or thickness, than regular motor oil. This type of lube is mixed with a synthetic fatty acid to increase its strength and lubricity. The high-purity chemical components have strong molecular bonds, so they are less likely to break down or allow oxidation. After the refinement process, many inorganic compounds remain. The antiscuff lubricants contain special additives that make them stronger and able to carry larger loads. They generally offer more consistent protection in sliding applications.
It allows for greater film thickness in certain applications.Gear lube is the type of motor oil used for transmissions, differentials, and transfer cases in trucks, automobiles, and other heavy equipment in order to prevent metal-to-metal contact that can cause severe damage. An advantage to these additives, compared to sulfur phosphorous compounds, is that their activation does not depend on high surface temperatures. Compound lubricant is also known as cylinder oil, since it was originally used for steam cylinder machinery. It is designed for moving parts that operate at high speeds but with low, consistent loads. There are many different types, but most fall into these three broad categories: Rust and Oxidation Inhibited (R&O). Finally, you will want to choose a base oil that's suited to your particular equipment and application. After viscosity, it is important to consider which type of gear lube you need. These strong bonds also keep the lube from getting too thick when it's cold or too thin when it's hot. It is commonly used in worm gear applications, where the gears move in a regular sliding motion and are built from metals that may corroded if antiscuff lubricants are used. Alternatively, a service professional should be able to recommend something for your machine, based on the type of equipment and your use.